HAUG Sirius Series: t/m 101 bar

HAUG Sirius Series: t/m 101 bar

SKU
sirius

The HAUG.Sirius series has been used for compressing air and gases since 1973 and is a very mature compressor concept that has been continually improved and developed over the decades. In the meantime, numerous variants for different applications have become available.

Details

HAUG.Sirius compressors with magnetic coupling were developed by HAUG Sauer and ensure leak-free compression of gases. This hermetically sealed and completely wear-free drive was used by HAUG Sauer for the first time in a reciprocating compressor in 1989 and can be used for suction pressures up to 31 bar (abs).

Magnetic clutch
The HAUG compressor design achieves a permanent leakage rate of less than 0.001 mbar l/s.

Permanently hermetically sealed compressors at standstill and in operation
The hermetically sealed piston compressor is achieved by a drive with magnetic coupling
No wear of the sealing element
No sealing gas
No loss of energy
High suction pressure

Suction pressure up to 31 bar (abs)

Hermetically gas-tight, no loss of gas and no wear and tear
Low energy consumption, better efficiency, lower power consumption
Compact compressor

FEATURES:

  • Fully oil-free and dry-running reciprocating compressor
  • Permanently technically sealed with magnetic coupling
  • Environmentally friendly as it is oil-free, gas-tight and efficient
  • HAUG.Sirius compressor block leakage rate < 0.001 mbar l/s
  • Air-cooled or water-cooled versions
  • Motor power from 7.5 to 30 kW
  • Speed range 970 to 1450 RPM
  • Suction pressure max. 31 bar (abs)
  • End pressure max. 101 bar (abs)
  • Modular cylinder configuration with cylinder diameters up to 180 mm
  • Versions with 2, 3 or 4 cylinders with 1-, 2-, 3- or 4-stage design
  • Maximum flow rate at atmospheric suction pressure approx. 400 Nm3/h
  • Booster compressor version flow rate max. approx. 1000 Nm3/h
  • Explosion-proof compressor design (ATEX zone 1 or zone 2 compliant)
  • Extremely robust and durable construction
  • Compact and foundation-free installation

APPLICATIONS

  • Carbon dioxide recovery and carbon dioxide compression from supercritical CO2
  • Supply of nitrogen inert gas during ESD (Emergency Shut-Down)
  • Recovery of natural gas (leakage gas)
  • Oil-free booster compression of oxygen
  • Oil-free booster compression of nitrogen and air (CDA = Clean Dry Air)
  • Oil-free recovery and compression of SF6 gas
  • Oil-free booster compression of natural gas and biomethane
  • Oil-free compression of noble gases such as helium, argon
  • Compression of refrigerant gas, e.g. C3F8, R410 or ammonia
  • Compression of synthesis gas for methane and hydrogen production and power-to-gas applications

More Information

More Information
Maximum druk 101 bar
Maximum flow rate 400–1000 m³/h
Maximum power 7.5 - 30 kW
Maximum suction pressure 31 bar